Hello Editsuite.com friends,

Due to tons of abuse, we now require that you request user access by sending us your Login, Name, Email Address, Phone Number, and Profession by submitting that info HERE.  I'll review your request and try to get back to you within the week.  You can't imagine how many folk want to trash forums with bogas advertising. 

Also, please help us gain enough Facebook "Likes" to have a custom Facebook URL!  

--Gary Lieberman

GVG 250 and Lance Controller

3 replies [Last post]
Wed, 06/13/2007 - 16:42
Scott Dailey
User offline. Last seen 14 years 17 weeks ago. Offline
Joined: 19 Aug 2005

Hello All,

Anyone out there running a Lance Controller off of a Grass 250? If so what are the specifics? My TD the other day on a show had the 250 running the Lance but was unable to get it to recall effects. He was running the Lance with P-bus triggers. (6 available on the 250) We did not have an engineering manual so we were unable to explore dip switch settings, if it is similar to the 300 and an A-53.

Scott

Top
Wed, 06/13/2007 - 19:18
#1
Scott Dailey
User offline. Last seen 14 years 17 weeks ago. Offline
Joined: 19 Aug 2005
Hi Guys, Looks like we were on the right track. Dan, your post gave me a couple of nuggets to use. I'll send this to my TD. Thanks, Scott Dailey
Top
Wed, 06/13/2007 - 18:23
#2
Dan Berger
User offline. Last seen 14 years 10 weeks ago. Offline
Joined: 7 Oct 2005
Hey Scott, here is an earlier post of my experience with the 250. I was just on it a couple weeks ago for the 1st time in several months. Good luck! Hope you're doing well! --- Dan
Top
Wed, 06/13/2007 - 17:15
#3
Matt Chirdon
User offline. Last seen 14 years 25 weeks ago. Offline
Joined: 14 Apr 2006
We used to run a 250 with an A51 and a DNF ST3000. It was able to call up different registers on the DVE and DNF using PBus. As I recall, in the streamline menu under "Periph" you had to make sure the device was enabled, then BEFORE you learn the register, you have to go to the menu where you set GPIs and what not (don't remember what the menu was called) and select the pBus device you want to learn into the register. I hope this helps, it's been awhile... Matt
Top