Dveous Output question
Thu, 01/17/2008 - 10:14
Can you take each individual Dveous channel and output them as 4 different sources, then re-enter them as 4 different crosspoints on a switcher? For a future show (using a GVG 4k) I've been asked to feed 4 different vertical 16x9 plasmas with different sources, all of which have to be rotated 90-degrees.
Any other solutions out there? I could see if there are some cheap 1-channel DVEs out there...
A Kalypso would solve the problem, but the $$ isn't there.
Thanks
Tom
Thu, 01/17/2008 - 19:39
#2
Tom, is this show a one off or a series? Does the budget allow for rental of a few A53s? Heck, Bexel shows several for sale for $1,600 each. Not sure what the true rental price would be.
Thu, 01/17/2008 - 18:21
#3
Tom, you need to buy the cards or maybe rent?
They slide into open slots if you have any. If you have CPL and 8 inputs, (4 cards plus one for cpl) you will need to not only get the output cards (2 of them) but remove a pair of inputs, which in your case shouldn't be a problem. DVEous allows for 6 slots.
Thu, 01/17/2008 - 12:58
#4
Mike- it's the classic... how do you get the separate outputs? Are the 1a/b and 2ab outputs on the chassis? I'd look myself, but I don't have a Dveous anywhere near me right now.
Thanks Mike,
Tom
Thu, 01/17/2008 - 11:37
#5
Tom, What version DVEous? With the "classic" frame there was an option for separate outputs BUT since the DVEous considers channels 1A and 1B to be one channel the most you could get out was two outputs, one with 1A/1B the other being 2A/2B. On an MX frame you should be able to get a different channel on each output.
A sense of humor is part of the art of leadership, of getting along with people, of getting things done.
-Dwight D. Eisenhower